av电影亚洲avav视频英国新首相上任第一天 任命弟弟当大臣

Ruby Enterprise Edition (REE) is a server-oriented distribution of the official Ruby interpreter, and includes various additional enhancements:

  • 發布時間︰

    ★新聞內存 台媒稱,猴年將至,大陸日前發行丙申年猴年郵票,卻意外引來搶購潮。人民幣38元的大版猴年郵票,10天內已被炒到800元,價差20倍。av电影 據台灣“中央社”1月18日綜合大陸媒體報道稱,大陸首次發行生肖郵票是1980年2月發行的庚申猴,今年1月5日發行的丙申猴已經是大陸第4輪生肖郵票。亚洲av 那麼,北京申冬奧代表團向奧組委承諾的2022年PM2.5比2012年下降45%的目標如何才能實現呢?其中,王安順市長反復強調的就是控制機動車污染排放。?污染賴誰??燃油機動車危害大佔污染源3成1997年1月,北京市機動車保有量首次突破100萬輛,達到這個數字,北京用了48年的時間。然而6年後的2003年3月,北京的機動車保有 量就翻了一倍,達到200萬輛。到2007年5月,北京市機動車保有量達到300萬輛,這一次只用了3年9個月。2009年12月18日,北京市機動車保 有量達到400萬輛。2012年突破500萬輛。2015年北京市機動車保有量大約在575萬輛。 那麼,今年是否有可能上調城鄉居民基礎養老金?據21世紀經濟報道不完全統計,包括河北、青海、江甦等在內的省份已在今年政府工作報告中明確提出,將上調基礎養老金待遇,比如江甦今年將提高到每人每月115元。av视频 “現在的情況就是,同樣一個零部件產品,進入整車企業有整車企業的編碼,自己生產企業有生產企業的編碼,而進入售後體系又有專門的編碼。比如博 世為奔馳配套的零部件,進入4S體系後,4S員工只能看見奔馳對其的編碼,不知道原編碼的。”在線汽車售後市場業務平台——彼恩思客PNSEEK的創始人 錢偉告訴《第一財經日報》記者。“這就造成一個問題,比如一個零部件壞了,車主想從外面的修理廠或者電商平台購買相應型號部件進行更換也會比較麻煩,因為 即便是同一款產品,來源不同編碼也不同。”封士明表示。這種信息的不對稱為整車廠商在售後零部件領域的壟斷提供了現實基礎。

    A copy-on-write friendly garbage collector. Phusion Passenger uses this, in combination with a technique called preforking, to reduce Ruby on Rails applications' memory usage by 33% on average.

  • An improved memory allocator called tcmalloc, which improves performance quite a bit.

  • The ability to tweak garbage collector settings for maximum server performance.

  • The ability to inspect the garbage collector’s state and the object heap state, for debugging purposes.

  • The ability to obtain backtraces for all running threads, making it easier for one to debug multithreaded applications.

  • Thread scheduler bug fixes and performance improvements. Threading on Ruby Enterprise Edition can be more than 10 times faster than official Ruby 1.8.

  • Various memory management tweaks so that the Ruby interpreter uses less memory on average, even when copy-on-write is not utilized.

Some of these features are gathered from third party Ruby patches: RailsBench, Sylvain Joyeux’s object allocation patch, caller_for_all_threads, Darryl Gove’s and Miriam Blatt’s Sparc optimization patches, Brent Roman’s MBARI patch set.

2. Installation and uninstallation

2.1. Installation via Debian package or source tarball

To install REE, download either the source tarball or the Debian package from the REE website. The source tarball contains a cross-platform installer. Installation instructions are available on the download page.

Note that this installer is written in Ruby, and thus requires a Ruby interpreter to run. Because not all systems come with a Ruby interpreter by default, the source tarball also contains a number of precompiled Ruby interpreters for various platforms, with the purpose of running the installer. The installer script will automatically use a precompiled Ruby binary for the current platform, if available. Precompiled Ruby interpreters for the following platforms are included:

  • x86 Linux

  • x86_64 Linux

  • x86 FreeBSD 6

  • Solaris

MacOS X and most FreeBSD systems already come with a Ruby interpreter by default.

So if you notice that the installer fails to start, please install Ruby first, then re-run the installer.

Warning It is not recommended to install REE into /usr because it can overwrite your existing Ruby installation in a way that the system doesn’t expect. You should install REE into an isolated place such as /opt.

2.1.1. Installation options

Disabling tcmalloc

If you experience problems with the tcmalloc memory allocator, then you can install REE without tcmalloc by passing --no-tcmalloc to the installer.

Non-interactive installation

You can install REE non-interactively either by using the Debian package, or by passing --auto=DIRECTORY to the REE installer. The latter will instruct the installer to non-interactively install REE into the specified target directory.

More options

You can read about all of the available installation options by passing --help to the REE installer.

2.2. Manual installation (for experts)

If you wish to install REE from source, but do not wish to use the included installer, or if the installer doesn’t work, then you can install REE manually. Please follow the instructions below.

Note that these instructions do not cover installing RubyGems.

2.2.1. Prerequisites

You need to have the following dependencies installed:

  1. A C and C++ compiler, preferrably gcc.

  2. The make tool.

  3. The patch tool.

  4. C development headers for zlib.

  5. C development headers for OpenSSL.

  6. C development headers for GNU Readline.

  7. yacc or bison.

2.2.2. Step 1: Download and extract the source tarball

Type:

tar xzvf ruby-enterprise-x.x.x.tar.gz

A directory called ruby-enterprise-x.x.x will now appear.

2.2.3. Step 2: Decide the prefix you want to install REE to

Please decide on a prefix to install REE to, and put this directory name into the PREFIX environment variable. We’ll need this value later in these instructions.

For example, if you want to install REE into /opt/ruby-enterprise, then run:

PREFIX=/opt/ruby-enterprise

Please note that the rest of this document assumes that REE is installed into /opt/ruby-enterprise. If you installed REE into a different directory then just replace /opt/ruby-enterprise with whatever the real prefix is.

2.2.4. Step 3: Install tcmalloc

Tcmalloc is a memory allocator which is usually more efficient than the platform’s native memory allocator. REE doesn’t require tcmalloc, but it will work better if tcmalloc is installed.

Compile tcmalloc as follows:

cd ruby-enterprise-x.x.x/source/distro/google-perftools-*
./configure --prefix=$PREFIX --disable-dependency-tracking
make libtcmalloc_minimal.la

If compilation fails, then skip to step 5. REE will work fine without tcmalloc.

After compilation, install tcmalloc as follows:

sudo mkdir -p $PREFIX/lib
sudo rm -f $PREFIX/lib/libtcmalloc_minimal*.so*
sudo cp -Rpf .libs/libtcmalloc_minimal*.so* $PREFIX/lib/
Note
MacOS X note
Instead of typing libtcmalloc_minimal*.so*, type libtcmalloc_minimal*.bundle*.
Note The reason why we don’t instruct you to type make and make install is because compiling tcmalloc with make usually doesn’t work on 64-bit platforms. The above instructions are a little bit more complex, but they work on all platforms where tcmalloc is supported.

2.2.5. Step 4: Configure REE

Change the current working directory to ruby-enterprise-x.x.x/source. If you were previously in the google-perftools directory, then type:

cd ../..

Run the configure script:

./configure --prefix=$PREFIX --enable-mbari-api CFLAGS='-g -O2'

2.2.6. Step 5: Compiling and installing the system_allocator library (MacOS X only)

If you are on MacOS X, then compile and install the system_allocator library:

gcc -dynamiclib system_allocator.c -install_name @rpath/libsystem_allocator.dylib -o libsystem_allocator.dylib
sudo install libsystem_allocator.dylib $PREFIX/lib/

2.2.7. Step 6: compiling and installing REE

Open Makefile. Search for a line which starts with:

LIBS =

Append the string $(PRELIBS) to the part after the = sign. For example, on Ubuntu 8.04, the 'LIBS = ' line becomes:

LIBS = $(PRELIBS) -ldl -lcrypt -lm  $(EXTLIBS)

Save the file. Now we can proceed with compiling REE:

make PRELIBS="-Wl,-rpath,$PREFIX/lib -L$PREFIX/lib -ltcmalloc_minimal"

Notes:

  • If you did not install tcmalloc, then you can omit the -ltcmalloc_minimal part.

  • If you are on MacOS X, then you need to append -lsystem_allocator to the PRELIBS option.

  • If you are on FreeBSD, then you need to append -lpthread to the PRELIBS option.

Now that REE has been compiled, install it with:

sudo make install

2.3. RubyCocoa compatibility and --enable-shared

In order to use RubyCocoa, the Ruby interpreter must be compiled with --enable-shared. By default, Ruby Enterprise Edition’s interpreter is not compiled with --enable-shared. You can compile the Ruby Enterprise Edition interpreter with this flag by passing -c --enable-shared to its installer, like this:

./ruby-enterprise-X.X.X/installer -c --enable-shared

Please note that enabling --enable-shared will make the Ruby interpreter about 20% slower. It is for this reason that we don’t recommend enabling --enable-shared on server environments, although it’s fine for desktop environments.

2.4. Tcl/Tk compatibility and --enable-pthread

In order to use Tcl/Tk with threading support, the Ruby interpreter must be compiled with --enable-pthread. By default, Ruby Enterprise Edition’s interpreter is not compiled with --enable-pthread. You can compile the Ruby Enterprise Edition interpreter with this flag by passing -c --enable-pthread to its installer, like this:

./ruby-enterprise-X.X.X/installer -c --enable-pthread

Please note that enabling --enable-pthread will make the Ruby interpreter about 50% slower. It is for this reason that we don’t recommend enabling --enable-shared on server environments, although it’s fine for desktop environments.

2.5. How REE installs itself into the system

By default, REE installs itself into a directory in /opt. If you already had a Ruby interpreter installed (typically in /usr; let’s call this the system Ruby interpreter), then REE will have no effect on it: REE lives in isolation and in parallel to the system Ruby interpreter. This also means that:

  • If you have any software which depends on the system Ruby interpreter, then that software will not break. It will continue to work like before.

  • REE has its own set of Ruby libraries, and its own set of gems and its own set of commands. If you install a new gem using the system Ruby interpreter, then that gem will not show up in REE’s gem list, and vice versa.

  • When running Ruby programs, the system Ruby interpreter will be used unless you explicitly configure the system to use REE by default.

2.5.1. Why doesn’t REE use the system Ruby interpreter’s gems?

REE does not use the system Ruby interpreter’s gems because it can cause problems with native extensions, e.g. RMagick, Mongrel, Hpricot, etc. A native extension compiled for one Ruby installation might crash when used in a different Ruby installation. This is why you must reinstall your gems in REE.

2.6. Upgrading

To upgrade REE through the Debian package, just install the Debian package.

To upgrade REE through the source tarball, run the installer in the source tarball and specify the same destination prefix directory that REE is currently installed in. For example, if REE is currently installed in /opt/ruby-enterprise-20081215, then specify /opt/ruby-enterprise-20081215 in the upgrade source tarball’s installer.

2.7. Uninstallation

If you installed REE through a Debian package, then uninstall the Debian package with dpkg or with apt-get.

If you installed REE through the source tarball, then you can uninstall it by deleting the directory in which REE is installed. For example, if REE was installed to /opt/ruby-enterprise-X.X.X (the default), then just delete that directory. It is for this reason why we recommend installing REE into its own directory.

3. Using Ruby Enterprise Edition

3.1. General usage

Normally one would run a Ruby program by invoking the Ruby interpreter with a source file as its first argument:

$ ruby some_program.rb

To run the same program in REE, invoke the equivalent command in REE’s bin folder:

$ /opt/ruby-enterprise-X.X.X/bin/ruby some_program.rb

The same applies to other Ruby commands such as gem, irb and rake. For example, if you want to install Ruby on Rails for REE, invoke:

$ /opt/ruby-enterprise-X.X.X/bin/gem install rails

3.2. Using REE with Phusion Passenger

To use REE in combination with Phusion Passenger, you must run the Passenger Apache 2 module installer that’s associated with REE. The REE installer installs the Passenger gem by default, so you just have to run the Passenger Apache 2 module installer:

/opt/ruby-enterprise-X.X.X/bin/passenger-install-apache2-module

Then follow the instructions that the installer gives you.

3.3. Configuring REE as the default Ruby interpreter

It is possible to configure REE as the default Ruby interpreter, so that when you type ruby, gem, irb, rake or other Ruby commands, REE’s version is invoked instead of the system Ruby’s version.

To do this, you must add REE’s bin directory to the beginning of the PATH environment variable. This environment variable specifies the command shell’s command search path. For example, you can do this on the command-line:

$ ruby some_program.rb    # <--- some_program.rb is being run
                          #      in the system Ruby interpreter.

$ export PATH=/opt/ruby-enterprise-X.X.X/bin:$PATH
$ ruby some_program.rb    # <--- some_program.rb will now be run in REE!

Invoking export PATH=... on the command-line has no permanent effect: its effects disappear as soon as you exit the shell. To make the effect permanent, add an entry to the file /etc/environment instead. On Ubuntu Linux, /etc/environment looks like this:

PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
LANG="en_US.UTF-8"
LANGUAGE="en_US:en"

Add REE’s bin directory to the PATH environment variable, like this:

PATH="/opt/ruby-enterprise-x.x.x/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
LANG="en_US.UTF-8"
LANGUAGE="en_US:en"

4. Garbage collector and object space

4.1. Copy-on-write friendliness

By default, REE’s garbage collector is not copy-on-write-friendly, just like a stock Ruby interpreter. Copy-on-write-friendliness can be turned on during runtime by calling: